Bondtech CHT Coated Brass Nozzle 5 pack


These are nozzles for High Flow applications
They are manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

Mosquito / Magnum
Mosquito Liquid
Mosquito Magnum+
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Features of Bondtech CHT Coated Brass Nozzle 5

5 units per pack;
Includes the following sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mm;
Optimized for 1.75mm filament;
Compatible with 2.85mm filament.
Requires 6mm wrench

EAN13 : 7350011414819

Out of stock

GTIN: 7350011414819 SKU: 600-C-CHT-MOS-175-T Categories: ,


Check the White Paper:


“Increasing Melt Capacity With 3 Nozzle Features”

Bondtech CHT Coated Brass Nozzle 5 Advantages

  • Higher melt capacity by increasing the surface area of the heating walls
  • Affordable price
  • Machined with ultra-precision
  • Brass nozzle with Nickel coated surface
  • Follows nozzle standards:
    • RepRap (M6×1×7.5×12.5)
    • MK8 (M6×1×5×13)
  • May be used with 1.75 or 2.85mm hotends.

Advantages of the Bondtech CHT Coated Brass Nozzle 5 :

Bondtech CHT Coated Brass Nozzle 5 split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

Core Heating is a patented technology

Registration number: EP3445568A1

Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.

Advantages of the Nickel Coating

A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.

Recommended Materials

Use this nozzle with the following materials:

  • PLA
  • ABS
  • HIPS
  • PC
  • TPU
  • TPE
  • Nylon
  • PETG
  • ASA
  • PP
  • PVA

For technical and abrasive materials we recommend to use other nozzles in our range.

Different nozzle sets for different materials

We recommend you to have several sets of nozzles because:

Using different materials with the same nozzles causes deposit build-up inside the nozzle.

These deposits will cause blockages.

We recommend changing nozzles when changing materials.

Freight Weight 55 g
Dimensions 10×7×8 cm
Nozzle size 0.60, 0.80, 1.00, 1.40, 1.80

Additional information