3D Zone Material Table
| Material | Printing with enclosure | Dry box recommended | Hardened nozzle required | Nozzle temperature (+-10 °C) | Bed temperature (+-10 °C) | Printable on powder coated sheet | Printable on smooth PEI sheet | Printable on satin sheet | Printable on Special PA Nylon sheet | Soluble with common solvents | Heat deflection temperature (avg. °C) | Impact resistance Charpy (kJ/m2) | Tensile strength (Mpa) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PLA | No | No | No | 185-235 °C | 50-60 °C |  | | |  | |  |  |  |
| ABS | Yes | No | No | 230-255 °C | 95-110 °C |  with glue stick | with glue stick | | | |  | |  |
| ASA | Yes | No | No | 220-275 °C | 90-110 °C | with glue stick | with glue stick | | | | |  | |
| PETG | No | No | No | 185-235 °C | 50-60 °C | | with glue stick | | | | | | |
| Nylon | Yes | Yes | No | 240-285 °C | 70-115 °C | with glue stick | | with glue stick | - | |  | | |
| PC | Yes | No | No | 270-275 °C | 100-115 °C | with glue stick | with glue stick | | | |  |  | |
| PVB | No | No | No | 215 °C | 75 °C | | | | | | | | |
| Flex | No | Yes | No | 220-260 °C | 40-85 °C | | with glue stick | with glue stick | | | | | |