BASF Forward AM
Slice engineering

Polymaker Polyterra PLA+ 1.75mm 1KG


Product Description

Polymaker PolyTerra PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

Print settings

  • Nozzle Temperature: 190°C - 230°C
  • Build Plate Temperature: 25°C - 60°C*
  • Build Surface Material: Works well with most common build surfaces.
  • Build Surface Treatment: Typically none required. Some surfaces such as glass work best with PVA glue stick.
  • Cooling Fan: ON
  • Printing Speed: 30 mm/s - 70 mm/s
  • Retraction: The ideal retraction settings vary from printer to printer. If you find the retraction settings are causing gaps in your part, the following settings may help. Direct Drive: Retraction distance of 0.5 - 1mm with retraction speed of 20mm/s Bowden: Retraction distance of 2 - 3mm with retraction speed of 20 - 40mm/s
  • Recommended Support Material: Single Extrusion: Self Support Dual Extrusion: PolyDissolve™ S1 (Dissolve in tap water) PolySupport™ (Easy break-away support material)

Material properties

  • Tensile Strength: 27.0Mpa
  • Toughness: Moderate Impact Strength
  • Glass Transition Temperature: 59°C
  • Rigidity: Moderate

Product presentations and reviews



There are no reviews yet.